![Energy Manager](https://www.energy-manager.ca/wp-content/uploads/2019/06/website-logo-em.png)
Envelope
Dual display clamp-on meters
AEMC’s Models 670 and 675 are true RMS clamp-on meters that provide RMS measurements for today’s non-linear electrical environments.They are general purpose professional clamp-on meters that measure up to the toughest standards, says the company. These meters offer a complete set of measurement ranges (AC Amps, DC Amps (675 only), AC Volts, DC Volts, Ohms, Continuity with beeper, Frequency from V or A, and Temperature) and are in compliance with international safety and quality standards to ensure professional and reliable measuring tools.
July 8, 2009 By Energy Management
These meters are designed to measure and display amps and volts at the same time. A press of the display key will toggle the bottom display to show frequency. They are also autoranging and provide the best measurement range and resolution for troubleshooting.
The Models 670 and 675 are sized for comfortable, one-handed operation. The tapered and hooked jaw design facilitates maneuvering in crowded wiring and breaker panels, making it easy to select conductors. The jaw opening accommodates one 750 kcmil or two 350 kcmil cables. The large easy-to-read 9999-count LCD features comprehensive user information symbols, such as low battery, polarity, overload and AC/DC indicators. Both models are equipped with a Data Hold function that freezes the measurement for later viewing, and a Min/Max and Peak function to capture signals.
Print this page
- Flexible solar strips light up campus bus shelter at McMaster
- Dockside Green celebrates being selected as a founding ‘Climate Positive Development’